Features |
Specifications |
|---|---|
|
Temperature
|
35 Deg C or 100 Deg C
|
|
Size
|
150 mm / 70.6 mm
|
|
Material for Construction
|
Stainless steel
|
|
Display
|
Digital
|
|
Accuracy
|
+/- 1%
|
|
Cycle
|
24 Hour cycle
|
|
Minimum Order Quantity
|
1 Piece
|
Product Description - Curing Tank
The Curing tank has been designed to accommodate 150mm / 70.6mm cube moulds upto 36/72 cube mould and fully insulated, complete with a hinged lid, heater, thermostat and re-circulated pump. Provision of two removable racks allowing free circulation of water around each mould. The pump, drain valves and electrical equipment are housed in a compartment located at one end of the tank. The curing tank heater is heated by an immersion heater under normal conditions and refrigeration system for grey cement the temperature is controlled at 35° C or 100° C ± 2° C / 27° C +2° C,expect for the 15 minutes after immersion of the freshly made specimens.
Features:
- 24 Hour cycle from time of mixing.
- Controlled 35° C or 100° C ± 2° C Curing Temperature for concrete.
- Controlled 27° C ± 2° C Curing Temperature for grey cement.
- ZI 2045A Curing Tank for 6/12 moulds of 150 mm / 70.6 mm size
- ZI 2045B Curing Tank for 12/24 moulds of 150 mm / 70.6 mm size
- ZI 2045C Curing Tank for 24/48 moulds of 150 mm / 70.6 mm size
- ZI 2045D Curing Tank for 36/72 moulds of 150 mm / 70.6 mm size
Note:
- Accelerated curing tank with cooling arrangement is also available of request.